Folio Stand

Home / Free music tools

Tap tempo and BPM tapper

This tap tempo tool finds the BPM of any song. Tap the button, or press the space bar, on every beat while the music plays. The BPM tapper averages your taps, names the tempo marking, and can play a click at that speed so you can check it by ear.

Tap along

Tap at least twice

Tap the button, or press the space bar, on each beat. Four or more taps give a steadier reading.

Check it and use it

Listen
Note at 120 BPMmsDottedTriplet
Whole note2000.03000.01333.3
Half note1000.01500.0666.7
Quarter note (one beat)500.0750.0333.3
Eighth note250.0375.0166.7
Sixteenth note125.0187.583.3

Tempo markings and their BPM

Composers often write the tempo as an Italian word instead of a number. The ranges below are the rough guide given on Wikipedia's tempo page. They overlap, and they vary a lot between composers and pieces, so treat them as a starting point.

MarkingMeaningAbout
Gravevery slow and solemn24 to 40 BPM
Largoslow and broad40 to 66 BPM
Lentoslow40 to 60 BPM
Adagioslow, with great expression44 to 66 BPM
Andanteat a walking pace56 to 108 BPM
Moderatoat a moderate speed108 to 120 BPM
Allegrettomoderately fast112 to 120 BPM
Allegrofast and bright120 to 156 BPM
Vivacelively and fast156 to 176 BPM
Prestovery fast168 to 200 BPM
Prestissimoextremely fast200 BPM and up

How the tap tempo tool works

BPM means beats per minute. Each time you tap, the tool notes the time. It takes the gap from your first tap to your last, divides by the number of gaps, and turns that average beat length into beats per minute: 60,000 divided by the beat length in milliseconds. A beat of 500 ms is 120 BPM.

Averaging many taps smooths out small timing errors, so the reading gets steadier the longer you tap. The tool keeps your last 12 taps. If you stop for more than 2 seconds, the next tap starts a fresh count, so you can measure a new song without pressing reset.

Tap on the main beat you would count or clap to. If the result looks twice as fast or twice as slow as you expect, you may be tapping every eighth note or every half note. Halve or double the number to match the beat you want.

BPM to milliseconds: delay and reverb times

Guitarists and producers set delay times to the tempo so the echoes land on the beat. One beat lasts 60,000 ÷ BPM milliseconds. A dotted note is 1.5 times as long, and a triplet is two thirds as long. The table in the tool updates for any BPM you tap or type. At 120 BPM it looks like this:

Note at 120 BPMmsDottedTriplet
Whole note2000.03000.01333.3
Half note1000.01500.0666.7
Quarter note (one beat)500.0750.0333.3
Eighth note250.0375.0166.7
Sixteenth note125.0187.583.3

Using the tempo on stage

Once you know the BPM, write it at the top of your chart so the count-in is the same every time. In a setlist, a quick tap at the start of rehearsal tells you whether the band has drifted faster than the recording.

Frequently asked questions

How do I find the BPM of a song?

Play the song and tap the button, or press the space bar, on every beat. After four or more taps the tap tempo tool shows the BPM, the average of your taps.

How many times should I tap?

At least four. More taps give a steadier number, because small timing errors average out. The tool uses your last 12 taps.

What BPM is Allegro?

Wikipedia's tempo page gives Allegro as about 120 to 156 BPM. Ranges for tempo words are rough and vary between composers.

How do I convert BPM to milliseconds?

Divide 60,000 by the BPM. At 120 BPM one beat is 500 ms, an eighth note is 250 ms and a dotted eighth is 375 ms.

Why is my BPM double what I expected?

You are probably tapping every eighth note instead of every beat. Tap half as often, or halve the number.

Does the tap tempo tool work on a phone?

Yes. Tap the big button with your finger. On a computer you can also use the space bar.

Sources